Grand Central Vac True Cyclonic System Specifications


	Grand Central Vac TRUE CYCLONIC® System Specifications
PERFORMANCE	260 The perfect choice for homes up to 3,000 square feet	466Q The perfect choice for homes up to 5,000 square feet	566Q The perfect choice for homes up to 8,000 square feet
PERFORMANCE
Sealed Vacuum (H₂0 lift)	106"	121"	135"
CFM Max	110	114	118
Max Air Watts*	443	477	535
Volts	120	120	120
Max/Avg Amps**	12.6/10.5	14.9/11.6	15.6/12.0
Level of Quietness dB***	70.1 dB_A	59.7 dB_A	60.7 dB_A
FEATURES
Filtration	True Cyclonic, requires no bags or filters	True Cyclonic, requires no bags or filters	True Cyclonic, requires no bags or filters
Collection Capacity	5.5 gallons	6 gallons	6 gallons
Low Voltage Controls	24 V PC Board	24 V PC Board	24 V PC Board
Overload Heat Protection	Pushbutton resettable circuit protector	Pushbutton resettable circuit protector	Pushbutton resettable circuit protector
Warranty	Lifetime Limited +3	Lifetime Limited +3	Lifetime Limited +3
Construction	20 gauge steel Powder-coated finish	20 gauge steel Powder-coated finish	20 gauge steel Powder-coated finish
Dimensions/Weight	12 5/8" dia. x 36 3/8" high / 26 pounds	12 5/8" dia. x 38 7/8" high / 28 pounds	12 5/8" dia. x 40 1/4" high / 31 pounds
INSTALLATION
Electrical Requirements	• 120V/60Hz, 1 ph, 15 amp circuit • Separate circuit recommended • 6' cord for NEMA type 5-15R receptacle with grounding wire	• 120V/60Hz, 1 ph, 15 amp circuit • Separate circuit recommended • 6' cord for NEMA type 5-15R receptacle with grounding wire	• 120V/60Hz, 1 ph, 15 amp circuit • Separate circuit recommended • 6' cord for NEMA type 5-15R receptacle with grounding wire
Mounting Requirements	Basement, garage, utility room. Prefer outside wall. Mounting bracket mounted on wall stud or masonry wall.	Basement, garage, utility room. Prefer outside wall. Mounting bracket mounted on wall stud or masonry wall.	Basement, garage, utility room. Prefer outside wall. Mounting bracket mounted on wall stud or masonry wall.
Exterior Venting	Single exhaust muffler included	Single exhaust muffler included	Single exhaust muffler included
back to top	* ASTM recognizes air watts as air power and is defined as "above the floor cleaning potential." Maximum amps refer to the potential amount of current if the power unit is running in a stand-alone situation. (no tubing or accessories attached). Average amps refer to the actual amount of current used when the power unit is in typical operation (installed, with accessories attached). * ASTM draft F11.50.07 test method was used to determine dB_A ratings. Sound levels were measured at 6' from the power unit. All power units were exhausted outdoors.